TuboX4 Crystal


TuboX4 Crystal recovers the pressure that tennis and padel balls lose during the game. It is the only one pressurizer on the market for cans of 3 and 4 balls. All in one. Shock and impact proof.

Product Information

TuboX4 Crystal is easy to use, fast and light. Introduce up to three tennis or padel balls inside the cylinder and screw the cover. Remember to place the O-ring to seal the air inside the TuboX4 Crystal and do not close all the way to make it easier to open.

Insert the nozzle of the air pump into the valve of the product and pump with the tab raised until reaching a pressure on the gauge of 22 to 34 PSI. Next, pull down the tab on the air pump and remove its nozzle. Done, your balls are recovering like new.

By filling the free space with compressed air, we increase the internal pressure of the TuboX4 Crystal and thus the balls cannot eliminate their internal air, maintaining and recovering the original pressure until the next time they are used.

Warning! Do not forget to remove the air through the valve using the plug before opening the TuboX4 Crystal again.

Each user can give the balls the pressure that he/she considers appropriate. At TuboPlus, thanks to the research of our Calibration and Metrology Laboratory, we recommend the pressures displayed in our Tables. By following these indications, use and recovery of balls will be flawless. This does not mean that you cannot use higher pressure in the TuboX4 Crystal.

TuboX4 is the most complete and advanced padel ball pressurizing cans of balls on the market, when compared to its competitors.

It has been created for the most demanding players, using high end components at a more economical and more competitive price.

It can be used with all sizes and models of 3 to 4 ball cans.

Our intention is to continue our international growth and abroad the use of 4-ball cans is more common.

The components are extremely safe and resistant; you will never have pressure losses due to impacts or drops. In addition, to avoid possible breakages we have removed the pressure gauge from the tube and integrated it into the High-End Pump to make it safer, as this particular component is sensitive and indispensable.

It includes in the pack a high-end Pump with a BETO Brand Pressure Gauge and a pressure chart according to a study that we have carried out over the years so that you know what pressure you should give the pressurizer according to the ball you play with and the number of games you have played.

  • WEIGHT: 440 g / 15,52 oz
  • WEIGHT WITH AIR PUMP: 593 g / 21,91 oz
  • LENGTH: 310 mm / 12,20 in
  • DECK WIDTH: 85 mm / 3,34 in
  • CYLINDER WIDTH: 70 mm / 2,75 in in


  1. Disassemble the O-ring with something that is not sharp so as not to damage it, and clean it with a piece of paper.
  2. Clean the cavity or hole where the O-Ring and the spiral are placed with a piece of paper.
  3. Clean the inside of the Lid with a piece of paper.
  4. Lubricate NOT IN EXCESS with Silicone Grease. We recommend the WEICON brand.